Support
Supporto
Questions, bug reports, a mixer that behaves oddly: write to apps@kiusso.net. If you can, tell me the mixer model and firmware, the iOS version and what you expected to happen.
Frequently asked questions
The app does not find the mixer.
Check that the phone is on the same Wi-Fi network as the mixer. Then check that the app is allowed to use the local network: open Settings on the iPhone, go to Privacy & Security › Local Network and turn on MixMK4Stage (the app has an "Open Settings" button that takes you to the app's settings). Tap "Try again" to search again. If the mixer is still not found, check that the mixer and the phone are on the same network and that the mixer's IP address is in the same range as the phone's (for example both 192.168.1.x).
I can't sign in with my user.
The mixer decides who can sign in. The user needs the SQ4You permission, and this includes the Admin user. Ask whoever manages the mixer to turn it on in the user's permissions. You also see only the Aux mixes and Layers the mixer allows for that user. A user who lacks the permission is listed as "No SQ4You permission" and cannot sign in.
The app says the mixer model is not supported yet.
The SQ-6 and SQ-7 are recognized, but only the SQ-5 has been tested. If the app can't read the configuration of your mixer, it says so; write to me with the model and firmware.
Two people on the same Aux.
The last change wins. Whoever moves a fader last sets the level.
Where are my presets and groups?
On the phone where you made them. They are not stored on the mixer and do not move to another device.
Can I try the app without a mixer?
Yes. Tap "Demo mode" on the first screen. You get a sample band, a few users and moving meters, and nothing is sent anywhere.
What you need
An Allen & Heath SQ-5, SQ-6 or SQ-7 (original series), firmware 1.6, on the same Wi-Fi network; an iPhone or iPad with iOS or iPadOS 17 or later; a free user slot on the mixer.
Not affiliated
MixMK4Stage is an independent app. It is not affiliated with, approved or sponsored by Allen & Heath. "Allen & Heath", "SQ", "SQ4You" and "MixPad" are trademarks of their respective owners and are used here only to say which mixers the app works with. Use at your own risk.
Domande, segnalazioni di errori, un mixer che si comporta in modo strano: scrivi a apps@kiusso.net. Se puoi, indica il modello e il firmware del mixer, la versione di iOS e che cosa ti aspettavi.
Domande frequenti
L'app non trova il mixer.
Controlla che il telefono sia sulla stessa rete Wi-Fi del mixer. Poi controlla che l'app possa usare la rete locale: apri Impostazioni sull'iPhone, vai su Privacy e sicurezza › Rete locale e attiva MixMK4Stage (l'app ha un pulsante «Apri Impostazioni» che porta alle impostazioni dell'app). Tocca «Riprova» per cercare di nuovo. Se il mixer non si trova ancora, controlla che mixer e telefono siano sulla stessa rete e che l'indirizzo IP del mixer sia nello stesso intervallo di quello del telefono (per esempio entrambi 192.168.1.x).
Non riesco a entrare con il mio utente.
Decide il mixer chi può entrare. L'utente deve avere il permesso SQ4You, Admin compreso. Chiedi a chi gestisce il mixer di attivarlo nei permessi dell'utente. Inoltre vedi solo gli Aux e i Layer che il mixer consente a quell'utente. Un utente senza il permesso compare in elenco come «No SQ4You permission» e non può entrare.
L'app dice che il modello del mixer non è ancora supportato.
SQ-6 e SQ-7 vengono riconosciuti, ma è stato provato solo l'SQ-5. Se l'app non riesce a leggere la configurazione del tuo mixer, lo dice; scrivimi con modello e firmware.
Due persone sullo stesso Aux.
Vince l'ultima modifica. Chi muove un fader per ultimo decide il livello.
Dove sono i miei preset e i miei gruppi?
Sul telefono dove li hai fatti. Non sono salvati sul mixer e non passano a un altro dispositivo.
Posso provare l'app senza mixer?
Sì. Tocca «Dimostrazione» nella prima schermata: una band di esempio, alcuni utenti e meter in movimento, e non viene mandato nulla da nessuna parte.
Cosa serve
Un Allen & Heath SQ-5, SQ-6 o SQ-7 (serie originale), firmware 1.6, sulla stessa rete Wi-Fi; un iPhone o iPad con iOS o iPadOS 17 o successivo; un posto libero per un utente sul mixer.
Nessuna affiliazione
MixMK4Stage è un'app indipendente. Non è affiliata ad Allen & Heath, né approvata o sponsorizzata da essa. «Allen & Heath», «SQ», «SQ4You» e «MixPad» sono marchi dei rispettivi titolari e qui sono usati solo per indicare con quali mixer funziona l'app. Uso a proprio rischio.